Produce large high resolution objects at a fraction of the cost of other 3D printers.

 

xy resolution 137 microns

Build volume 470 x 240 x 340 mm

REQUEST A QUOTE

SPECIFICATIONS

VIDEO TUTORIAL

 Liquid Crystal

PRO

DAYLIGHT PRO RESINS

Specially formulated for use on the Liquid Crystal PRO. Our Daylight PRO resins provide a full range of end properties from photopolymers highly active in the visible spectrum.

      PRO Firm

Ideal for making large objects that you want some rigidity but compresses under moderate to high force.

      PRO Flexible

Ideal for making large objects where you want flexibility.

      PRO Hard

Ideal for making large scale objects where you want a very hard object.

      PRO High Tensile

Ideal for making large scale objects where you want a very hard object.

LIQUID CRYSTAL DISPLAY

LCD Specification: 3840 x 2160

 

Integral to the printer is the unmodified high resolution LCD panel used to cure the resin. While the XY panel size of 137 microns gives accuracy and fine detail, the high brightness and high contrast also contributes to building faithful representations of your 3D models.

LARGE PRINT PLATE

 

The Print Plate is made from an aluminum tooling plate to ensure flatness and resistance to corrosion. Perforated, it allows resin to flow and with its roughened finish it ensures a good print adhesive.

DURABLE VAT SYSTEM

 

The skin of the vat is 100 micron FEP film with a flexible, non-srick surface to ensure a good release of the printed part from the screen. Being thick and durable, it'll last for days of printing and its two Neoprene gaskets ensure the vat is totally selaed. To guarantee performance consistency, the vat film and gaskets can be replaced as necessary for your hundreds of prints.

SOLID AND RELIABLE DRIVE UNITS

There are two maintenance-free drive units featured in the Liquid Crytal PRO. Using 2mm pitch lead-screws and anti-backlash lead nuts for precision, they deliver repeatable positioning. Combined with the extruded rail profile preventing misalignment, they both provide twice the lifting power of the Liquid Crystal HR.

SPECIFICATIONS

TECHNICAL SPECIFICATIONS

Technology

Daylight Polymer Printing

 

Dimensions

82 (W) × 74 (H) × 49 (D) cm

33 (W) × 29 (H) × 20 (D) in

 

Weight

66 Kg (145 Lbs)

 

Power Requirements

100-240 V, UK/USA/EU Plug

 

LCD Specification

23.8″ (3840×2160 px)

 

Connectivity

USB, Display Port

 

Printer Control

Via PC

 

Resin Fill System

Manual

 

Build Volume

470 x 240 x 340 mm

18.5 x 9.4 x 13.4 in

 

XY Pixel Density

137 microns

 

Layer Thickness

50, 100 microns

0.002, 0.004 inches

 

Cure Speed at 100micron

50-100 sec/layer

(resin dependent)

PRINTER CONTENTS

 

Scraper

 

Rachet Socket Wrench

 

Nut Socket

 

Allen Key

 

Funnel

 

Paper Strainer x 10

 

Spray Bottle

 

Nitrile Gloves x 4

 

Vat Film Pack sub-assembly

 

Gasket pack sub-assembly

 

5 Kg Pro Hard Black resin

 

2 VAT film replacement

 

USB Cable

 

Display Port Cable

 

AC Cable

 

Printer Instructions

 

 

SOFTWARE

Creation Workshop

 

1 Year License (Windows Only)

 

*Software download available from Liquid Crystal Pro support page

 

 

 

Minimum Computer Requirements:

 

Dual Core Processor or above

Windows (Not compatible with Mac or Linux)

2GB Ram memory or above

 

 

 

Spare DisplayPort connection

 

 

 

 

Note: In order to run at max resolution a 4K video card is required.

 

 

 

WARRANTY

1 year warranty

VIDEO TUTORIAL

 

HOURS

M-T: 8:30- 4:30

F: 8:30 - 4:00

PRODUCTS

SUPPLIES

IMAGING CENTRE

CATALOGUE

ABOUT US

Tel:905.564.1300            Toll Free:1.800.567.3222           Fax: 905.564.4949           Sales: sales@dccltd.ca           Service: service@dccltd.ca